Introduction:

The camera adapter for compact objects - for easily locating and centring every planet A real challenge in planetary photography is locating the planet and centring it in the camera's field of view. This is where the camera adapter comes in. It allows you to centre the Moon, planet or deep sky object reliably, quickly and much more easily. The advantages in a nutshell compact camera adapter with a 17mm mirror, especially for planetary photography perfectly centred objects - both in the eyepiece and on your camera chip parfocal - focuses the object sharply both on the camera and eyepiece 1.25" and T2 connector on the camera side the camera adapter is a lightweight at only 170g. Also suitable for small telescopes. An astronomical camera does not have a viewfinder. When struggling to find an object you can really work up a sweat, even if it's freezing outside. First you have to gently remove the eyepiece without jogging the camera. Now where is the focus? Carefully focus and hope that the planet is still sitting in the centre of the field of view. The camera adapter dispenses with all this fuss. Flip to see everything You do not need to swap between the eyepiece and camera - you can have them both mounted at the same time. Use the knob on the side to quickly switch between camera and eyepiece. That allows you to check the subject at any time, making astrophotography so much easier. Both the eyepiece and camera are focused at the same time The focus positions of the eyepiece and camera are different. But a metal focus ring adjusts the eyepiece focus, so you get the correct sharpness for both. In future you will never need to ask yourself whether the planet or the deep sky object is in the field of view. You will now have full control. Full illumination for planetary cameras The built-in mirror illuminates camera chips with a chip diagonal of up to 23mm. This is more than sufficient for most planetary cameras. The right connection for your camera Whether a 1.25" or a T-2 thread - the camera adapter has both connections on the camera side. Simply unscrew the 1.25" adapter and the T-2 thread then becomes available. A lock screw keeps your camera secure. The 1.25" to T-2 inside adapter can also be connected to other accessories.